Start small and grow. Everything below works together, in the same app, with the same simple look.
Lights, fans, sockets, heaters, shutters — with one tap, from the app, the wall panel or a web page.
Every light or appliance you connect to a Fradomos circuit board gets a button. Tap it and it switches. You can see at a glance what is on, in which room, and turn a whole room — or the whole house — off before you go to bed.
You build your home room by room: living room, kitchen, bedroom, garage — with your own house photo as the background.
Fradomos is organised the way you think about your home. Create a room, put devices and sensors in it, and find everything where you expect it. Add a photo of your house and it appears behind your rooms and on the wall panel.
“Movie mode”, “Leaving home”, “Good night” — many actions with one tap, or at the time you choose.
A routine is a list of things that happen together: lights off, air conditioner to 22 degrees, TV on. Run it by tapping, or let Fradomos run it every day at the time you set — for example, the garden lights on at 18:00 and off at midnight.
Replace the stack of remote controls with one screen. Fradomos presses the buttons for you.
A small Fradomos infrared board sends the same signals as your remote controls. Pick the brand of your air conditioner or TV and you get power, temperature, mode and fan on your phone. If your device is unusual, teach Fradomos the buttons from your own remote.
Clear numbers for electricity: right now, today, this week, this month, and what it costs.
Fradomos knows how long each device has been on and how much power it normally uses, so it can show your consumption and cost per day, per room and per device. It points out the biggest users, so you know where to save.
Know how warm each room is, if a door was left open, and get a loud warning if there is gas.
Add a temperature and gas sensor board to a room by scanning its QR code — no wiring to the rest of the system. Door and window contacts tell you what is open. You choose the limits, and Fradomos warns you when they are passed.
A red screen on the wall panel and a notification on your phone when something needs your attention.
When a sensor passes its limit, when a circuit goes offline, or when a device has been on too long, Fradomos tells you — in the app, on the wall panel, and as a notification on your phone’s lock screen. Everything is also kept in an activity list.
Look at your cameras live from the same app. Live pictures are not recorded or kept by us.
Connect the cameras you already have. Fradomos shows them in a grid and full screen. Each person can be allowed — or not allowed — to watch. Away from home, the picture travels through our secure connection and is not stored.
Draw your home once. See lights glow, doors open and sensors report — right on the plan.
Draw rooms and walls, place furniture, devices, sensors and cameras, and your home becomes a live map. Tap a lamp on the plan to switch it. Fradomos can find the rooms from the walls you draw.
A touch screen on the wall: switch things, see the clock and the weather, lock it with a code.
Fradomos runs on a Raspberry Pi touch screen as a wall panel that starts by itself. It shows your rooms, goes to a calm clock-and-weather screen when nobody uses it, can be locked with a four-digit code or a pattern, and shows a red warning when there is gas.
Children, guests, family, the cleaner: each person sees and controls only what you allow.
Every person has their own account. For each room you choose: no access, look only, or full control — separately for at home and for away. Admins can manage everything; nobody else can change who has access.
Switch the heating on before you arrive, check the cameras on holiday. Remote access is optional.
At home, everything works without any subscription and without the internet. If you also want to reach your home from outside, you add remote access with a plan. We never store your home’s information: your request goes through to your own box and the answer comes back.
Your rooms, devices, history and pictures are kept in a box in your own house — not in somebody else’s cloud.
Lights, panel, app at home — they all keep working when the internet is down.
Scan the QR code on a circuit board and tell it your Wi-Fi. No cables to configure, no technical words.
Simple enough for everybody, with separate access for each person.
Get the app, add your first room, and switch your first light in a few minutes.
Fradomos